Tankless Water Heater Repair Santa Barbara

Tankless Water Heater Repair Santa Barbara TroubleshootingTankless Water Heater Repair Santa Barbara

Usually, most of the issues that could accompany a tankless water heater, causing it to require a repair are external factors. Here are a few of them:

  • The venting is not right. The most common mistake is using typical B-vent, which can swiftly destroy the heat exchanger due to acidic condensation.
  • Examine the gas supply line. Occasionally the supply line is undersized and was just connected to the existing line size. The size specified in the installation handbook requires to be made use of.
  • The gas pressure is not proper. The working pressure needs to be from 5 to 10 1/2 inches WC for Natural Gas and 9 1/2 to 14 inches for Liquid Propane, depending on the design.
  • The wrong sort of gas that is being used – natural gas or liquid propane. It is not possible to use the non-specified kind.
  • Water flow or temperature level change concerns. There are numerous things we will examine to make certain they are working correctly, like cleaning or changing the input filter, examining the check valve, checking the seals in the faucets and looking to see if there is a cross flow someplace that must be repaired.
  • Hard Water Problems: In locations where the water is really hard, de-scaling will be required occasionally.
  • Environmental issues. The heaters must be installed in a clean area with access to combustion air that is free from dust, lint, grease, or chemicals.

Back to Water Heater Repair Santa Barbara CA